Summary

Did you just break your favorite mug?

This 3D file is therefore made for you :)

I provide you with this handle for broken cups!

Here is the file you need if you have broken your handle of your favorite cup.
Very resistant and quite simple in 3D printing, it contains only one piece and is possible to print with very little support, the walls of the base are thick for a good hold of the cup and to avoid breaking the base. It has a simple but effective design. You can obviously remove it from its base to be able to wash it and put it back later and so on.
The handle is very nice and shows the powers of 3D printing for everyday objects.
With a good filling this allows the good resistance of the support. I recommend it to avoid throwing away your cup and buying another one!

Thank you ;)

Intended for cups with a diameter of 8 cm in external diameter and a height of 9.7 max.

Print Settings

Printer Brand:

UltiMaker

                                            Printer:                      
Ultimaker 2+

Rafts:

Yes

                                            Supports:                      
Yes

Resolution:

0.2 mm

                                            Infill:                      
60 % (to be sure)

Filament:

JAYO PLA

                Red                    
                        Notes:                     The only important parameter here is the filling to allow good resistance in relation to the weight of the cup and its container. I took a 60% gyroid infill and it fits perfectly.

Made in PLA in 5h with supports on an ultimaker 2+.