Plastic Razor Bed Scraper by Generic User

Generic User

3D Printer>3D Printer Accessories

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

PLA Basic print

Designer

43 min

1 plate

4.8(6)

PLA Hex Exposed Two-Tone

Designer

1.1 h

1 plate

A1 Mini PLA Textured top 0.16mm layer, 3 walls, 15% infill

Designer

1.2 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Amazon has great oddities that are too good to resist. The humble razor blade is hell sharp and dangerous in close proximity of fingers, don't ask me how I know… I bought a pack of these 6mths ago and still haven't made a dent in the packet of 100, I dare say it's going to take some time. These are bed safe and won't marr your surface if you go in at the wrong angle, they also won't take the top of your finger off if you slip. This model is an upgrade to the last one which has served me well, it was time for a refresh and I'm happy to say it turned out well.

You'll need a M3x8mm screw and a 10x3mm magnet for this model. Check Amazon for the Razors, https://www.amazon.com/s?k=plastic+razor+blades&crid=ADLNHAZIHZT6&sprefix=plastic+razor+blad%2Caps%2C518&ref=nb_sb_noss_2

There are two versions, one is plain and the other a little artistic with two-tone exposed infill. Choice is yours… Make both, they come in handy.

**Try the Tri-Tool to go alongside the Scraper

https://makerworld.com/en/models/173932#profileId-230634

Comment & Rating (13)

@user_2487772254

Print Profile

PLA Basic print

some surface roughness issues but I thinks it was on my end. printed in overture PETG.

The designer has replied

@GenericUser

The profile you used was for PLA and generally too fast for PETG. I'd suggest slowing down the wall speeds to 100mm/s for a better result with calibrated filament. Thanks for the feedback and rating :)

(Edited)

@user_2487772254

Replying to @GenericUser :

thanks for the tip I’ll try this next time. I was having issue with my PETG prints and ended up changing the nozzle recently and it made a difference. I should do more cold pulls to clean out any particles that my be left in the nozzle more frequently.

(Edited)

@maxv

Print Profile

PLA Basic print

Perfect

The designer has replied

@GenericUser

Green FTW! Thankyou for the comment and rating :))

@user_1034085222

Print Profile

PLA Basic print

perfect print on my X1C.

The designer has replied

@GenericUser

Great, thanks for the comment and rating :))

@SVCprints

Print Profile

PLA Basic print

works great, use this on the textured plates instead of the Bambu scraper. that Bambu scraper will mess up your plate if your not careful.

The designer has replied

@GenericUser

That BL scraper scares the f.. outta me, its way too sharp and better off used for chopping PTFE etc. Thanks for the comment and rating :))

@user_1289661847

Print Profile

PLA Basic print

The designer has replied

@GenericUser

Thanks for the rating :)

@tqone222

Print Profile

PLA Basic print

The designer has replied

@GenericUser

Thanks for the rating :)

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.