Surface tablet wall mount
Print Profile(1)
Description
Mounting bracket for Microsoft Surface 10in tablet.
- Base part attaches to the wall with two screws. The distance between the screws is 3-9/32" (84mm, standard US Box Mount).
- The other part goes to the tablet's back with double-sided tape (I used 3M Scotch 4910 VHB)
Then the tablet slides to the base.
_____________
Update after a couple of weeks of use:
The wall plate has warped slightly. I suspect the heat from the tablet is too much for PLA, so it isn't the best choice here. I suggest using a more heat-tolerant material like ABS, ASA, or PETG.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)