Hundred Family Surnames Refrigerator Magnet - Zhai

Please read the instructions before printing After multiple test prints comparing various sizes, the current font size is about 65mm. With accessories like lanterns, firecrackers, and auspicious clouds, the overall model size will be between 80mm and 100mm, depending on the complexity of the font. If made any larger, the entire refrigerator magnet would appear very bulky, so this size was ultimately chosen. However, the drawback of this size is that smaller characters may not be as clear

If you pursue perfection, please switch to a 0.2 nozzle for printing or enlarge the model size Creating is not easy, please be gentle with your ratings!!

The renderings are all from models I printed and tested one by one. For cost reasons, I used inexpensive PETG material for printing. In practice, PLA yields better results, so I recommend using official Bambu Lab PLA for printing!

The model's bottom defaults to negative parts for 6*3mm round magnets. If you need other sizes, please download and change the negative part size yourself. Try to use thicker magnets for a stronger hold

Each model will have 3 magnet holes. Actual testing shows that two are usually enough for a strong hold. You can install the specific number as needed

Surname sorting is done alphabetically (A-Z) in the profile Please search patiently first, and if you truly cannot find it, leave a comment, and I will create it as soon as possible. The surname collection does not accept characters that are not surnames

Currently, there are about 200 surname refrigerator magnets, each with a separate link. You can directly click on my homepage and search for your surname among my published models to collect and print

If you don't want to stick them on the refrigerator, here are surname ornaments, click the link below

Instant Prosperity Hundred Surnames Ornaments (Surname Collection) - Free 3D Models - MakerWorld

Another link contains Hundred Surnames pendants, which you can print and hang in your car or any place you wish to decorate

2026 Year of the Horse Custom Surname Pendant - Free 3D Models - MakerWorld

If you want to customize a nickname, one boost for one character. Go to the link below to boost and leave a comment

Surname Auspicious Character Customization Collection - Free 3D Models - MakerWorld

My beloved son has also made some small models. On his account, he has cages and skateboard toys he made for his parrot. If you are interested, you can go and take a look

Jinbao Plays 3D | Home - MakerWorld