Whirlpool ED2KVEXVB01 Drip Tray by Captivate4579

Captivate4579

Household>Other House Models

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.8 h

1 plate

Boost

Released

Description

I believe this is the model will work with several different fridge models besides the ED2KVEXVB01. The normal part has 3 grooves that are very difficult to clean. This one is a flat-bottom design. I would recommend printing in the given orientation to prevent sagging. Also, I would recommend sealing with food-safe epoxy to prevent leakage if you are unsure of your layer precision. You can test the water retention before installing if you'd like.

Comment & Rating (3)

@user_2111574649

How did you make this? Fusion 360 with the sketch and extrude tools? Any tips/tutorials/courses for me on how to learn to make 3D models myself?

The designer has replied

@Captivate4579

just Plasticity with some measurements and reference photos. I used curves combined with extrusions to remake the exterior of the original drip tray with nubs on the sides to snap it in place.

@user_2111574649

Replying to @Captivate4579 :

Wasn't even aware of Plasticity! Thanks for the reply.

No more