ParkerH44

cover

Screenshot 2024-03-03 at 6.30.04 PM_b84559a8-6c44-4492-a340-3fd6c1c1e543.png

Screenshot 2024-03-03 at 6.30.29 PM_b93b33c6-41fc-4dc2-9b35-c6fd58d79093.png

plate_1.png

Warrior10JJ

WhatsApp Bild 2024-11-18 um 14.13.25_d6a057a8.jpg

0.28mm layer, 2 walls, 15% infill DOES NOT SHOOT OR WORK!!!

Sudz

IMG_8892.jpg

Found the original Print profile a bit too chunky, and a bit too small for the Nerf Blow Dart tubes I also printed. Took the Original, increased it 110% (to 12.1mm Diameter) 6 darts is minimum - If you print less there&#39;s not enough cooldown time and it gets a bit &#34;bloby&#34; at the top. (If you insist on trying, do 50% “silent” speed, and set fans to absolute max) For a cleaner top, knock the printer speed down to 50% at the end.  You might want to add a brim, but I had no failures with the settings in the print profile:  <ul><li>.2 layer height</li><li>0.54 Line Width, except for infill.</li><li>1 wall loop (instead of 2)</li><li>Staggered seam (makes it so there&#39;s no weak point because of the single shell)</li><li>Top Shell thickness 7mm (Reaches the top of the inner cavity, adds nice weight and flight characteristics.)  </li></ul>Definitely gets a little wobbly at the end from lack of structure, but they fly like a bat out of hell, and have that appropriate squishy light feeling when you grab them. (see photo, i&#39;m squeezing the left dart) Tried printing nose down but it was too floppy to properly work toward the bottom of the dart when it was at the top.  I printed this with 3 year old TPU so there&#39;s a bit of stringing at the top I hit with a blowtorch for a split second. I don&#39;t know that this would work on a bedslinger.

0.2mm layer, 1 walls, 0% infill

This is a nerf bullet that should be able to be shot out of a normal nerf gun and ca be made out of whatever filament you want.&nbsp;I would flip it vertically in either direction to print it.

Nerf Dart

ASIA

Print Profile(2)

Description

Comment & Rating (111)

License

Related Models