Print Profile(1)
Description
Feel free to leave a comment or a boost if you like the print
Boost Me (for free)
Your boost helps me create even more models! Thank you for your support 🙏✨
Instructions
You can resize, but make sure not to modify the Z-axis
Print with 100% infill and a 0.08mm layer height, with a 0.16mm base layer
The model measures 129.42 × 230mm
You can print with higher layer heights below the 0.4mm base thickness
The maximum allowed thickness is 2.64mm and the actual thickness is 2.16mm
Filaments used:
- #000000 – Bambu Lab PLA Basic Black Transmission distance: 0.6
- #c5c1bf – WANHAO PLA Glacier Gray Transmission distance: 2.4
- #c70000 – WANHAO PLA Red Transmission distance: 3.4
- #ffffff – Bambu Lab PLA Basic Jade White Transmission distance: 5
This print uses 4 different filaments
Filament change instructions:
- Start with Bambu Lab PLA Basic Black
- At layer #12 (1.04 mm), change to WANHAO PLA Glacier Gray
- At layer #14 (1.2 mm), change to WANHAO PLA Red
- At layer #20 (1.68 mm), change to Bambu Lab PLA Basic Jade White for the rest of the print
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)