stacking box parametric
Print Profile(1)
Description
This is my parametric stacking box!
Model:
You can customize this stacking box to your desired measurements. Lets say you want to fill a certain space, here you go, you can customize it and fill the exact space you have.
Customizer:
Customize length, width, height and wall thickness.
The length should be not smaller than 80mm
The height should be not smaller than 35mm
The wall thickness needs to be within 2,6mm and 3,6mm.
If you use these boxes in a workplace environment, then you will bump up the wall thickness for strength.
Print profile:
I set up the print profile with a box of 100mm length x 55mm width x 50mm height.
There are no supports needed!
Filament:
This model can be printed in any filament you like.
I used PLA for ease of printing, PETG will be a good choice also. ASA will be the best choice for strength in a workplace environment.
Have a look at my other models here: SaVo3D | Home - MakerWorld
Boost Me (for free)
If you liked the model and found it helpful, I’d really appreciate it if you could give it a boost! It makes my day and helps make up for the time I spent making sure you had a great printing experience. Thanks a lot in advance!
Membership
Do you want to sell physical prints of my models? Join my commercial license program!
Fix adhesion-related printing errors by washing the build plate
Bambu Lab Textured PEI Plate Cleaning Guide | Bambu Lab Wiki
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)