Important!
Print the Top in 102% scale!

My little SD/USB card holder.

It consists of 3 parts:

1. Cover (print in PLA/PETG)
2. Centrepiece -> SD/USB Version (print in PLA/PETG)
3. Rubber ring (print in TPU)

It is mounted with a screw cap in the lid, as well as the middle part.

The TPU piece is simply pressed in slightly.

It includes three diffrent versions of SD/USB card holder:

• Version 1 can fit 4 large and 2 small SD cards .
• Version 2 can fit 3 large and 8 small SD cards.
• Version 3 can fit 5 USB sticks.

PLA: 0,15mm
210° - 60°
Infill: 40%
Printspeed: 45mm

TPU: 0,15mm
225° - 60°
Infill: 50%
Printspeed: 20mm