Easter butterfly - decoration by KRASNOVSKY

KRASNOVSKY

Art>2D Art

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.8(16)

PLA 0.2mm layer, 3 walls, 25% infill

57 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

120

210

158

Released

Description

Easy 2D butterfly decoration

Comment & Rating (21)

@birdhouse

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

beautiful

(Edited)

@turbo_911

Print Profile

0.2mm layer, 2 walls, 15% infill

Had issues with 1st layer laying flat/sticking on Bambu Textured PEI plate. I've tried wiping plate with alcohol and even tried different PLA brand, it was still having same issue at the same location. Top left side was giving issues.

Bed Adhesion Issue

The designer has replied

@Ji_Kra

Hello, in my opinion the adhesion problem is not caused by the model but by the print settings. When I print PLA on textured plate, I use 3DLACK (Aerosol Glue Spray). Alternatively, increase the temperature of the bed (60°C)

@turbo_911

Replying to @Ji_Kra :

I will try to increase bed temp, it was already at 55C, but worth a try. Also with texture plate, it says you don't need glue. Glue is for ease of release, not for sticking. I do not have a sticking issue. All other models I've printed stick very well, but thanks for the tip.