Overview:

This is the first 100% customizable rail-based organizing solution, perfectly adaptable to your needs. Currently, there are seven modules available, but you're welcome to create your own for specific applications. You can arrange the layouts as desired, and I've shared three effective layout options for you to try.

Customization:

Customization extends beyond the modules. You can modify the number and layout of the rail stations, with designs available for 1, 2, and 3 base station configurations. While a three-station setup may not be necessary for everyone, remember that this model isn't limited to desk organization; it's also suitable for kitchen use and similar applications.

To get a 1 rail configuration you need to print: Rail
To get a 2 rail configuration you need to print: RailEndRight and RailMiddleOne
To get a 3 rail configuration you need to print: RailEndRight, RailEndLeft and RailMiddleTwo

Most modules are designed for a single orientation as others would be impractical. However, the StorageStorage, Airpods, and card holder modules are designed to be rotatable and are marked with a 'Q' in their names.

CAD:

The CAD file for the rails is available as well, encouraging you to design your own modules. Don't forget to add a 0.1mm tolerance to every side of each rail.

Printing:

Print Settings:
- 0.2 mm Layer Height
- No Adhesion
- No Supports

For printing, I recommend orienting everything with the rails facing downwards, except for the phone holder, which should be printed with the rails sideways. Correct orientation images are provided for your reference.

Every module takes about 1h to print.
The Rail takes about 3h.

While I've devoted considerable effort to this model, I recognize it's not perfect. Your feedback and experiences are invaluable for future improvements.

Happy printing!