Mandaloriano realizado con programa Hueforge para imprimir en 3d

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA Overture Light Gray Transmission Distance: 0.7
PLA BambuLab Basic Jade White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #9 (0.8mm) swap to Jade White
At layer #15 (1.28mm) swap to Light Gray
At layer #19 (1.6mm) swap to Jade White for the rest.