HueForge Spiderman
Copyright Claim
HueForge Spiderman
Boost
68
128
36
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
5.3 h
1 plate
Open in Bambu Studio
Boost
68
128
36
2
282
118
Released
Description
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Sapphire Blue
At layer #30 (2.48mm) swap to Wine Red
At layer #47 (3.84mm) swap to White for the rest.
Documentation (1)
Other Files (1)
spiderman_describe.txt
Comment & Rating (36)
All
Hi ! I would like to print this but i have an issue with BambuStudio, the red layer remains on the eyes and not the rest of the body.
The spiderman ends up all blue with only white eyes and no red in the visualization under BambuStudio.
Is this normal?
Thanks for your help !
The designer has replied
0
Reply
are you making sure than your first layer height and all the other layer heights match up exactly?
0
Reply
Yes I’m sure.
For information, I have opened the project directly in bambustudio to get your configuration profile
0
Reply
Replying to @jsalonis
I fixed the problem!
I wanted to print it in a smaller size and that's why it changed the order of the printing layers.
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
Print was working fine, but I was not that happy with the quality and colors (a little bit too dark).
The designer has replied
0
Reply
switch to Polymaker Azure Blue.
0
Reply
Also, you gotta calibrate the filament, the surfaces etc doesnt look clean at all
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
Turned out great! Super easy print
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
my kid love it
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
Great print. Could use another layer or two of blue before switching to red, but overall I’m very happy.
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
came out great.
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
very nice model. my son loves it.
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
bonjour en existe til un de lautre cote
The designer has replied
0
Reply
no, but I am happy to make one and post it
0
Reply
merci beaucoup 😁
0
Reply
hi, sorry to bother you, first of all congratulations for your projects, but I wanted to ask you how do you separate all the colors like this with huegorge? do you prepare the image with other programs by adjusting the heights? Thank you
The designer has replied
0
Reply
everything is done 100% in HueForge
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld