Search models, users, collections, and posts
Yarn Spinner
IP Report
GIF
Print Profile(1)
0.16mm layer, 3 walls, 15% infill
Designer
9.4 h
2 plates
Open in Bambu Studio
Boost
125
385
2
0
98
47
Released
Description
Hi everyone!
After watching my girlfriend struggle with other yarn spinners, I decided to design my own!
*** What you'll need ***
- Three 8x3mm disk magnets (I used three stacked for additional strength and magnetism)
- One M6 dowel pin (any length, I used M6x10) Ensure that the rounded end of the dowel pin is facing down towards the yarn for best results.
- Optional but a 4x12mm socket cap screw to secure to the base.
Feel free to modify this to your own needs or desires. Additionally, I paused the base print and filled it with heavy lead pellets, this is not necessary but the added weight is nice. I also printed this with PLA-CF for additional strength, but Im sure regular PLA or PETG would work fine.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (2)