Mount for the Vive Lighthouse Cameras (Room Cameras). These can be mounted flat to the wall, in a corner, or at a 45 degree angle (shown in photos).

Main design features:

1. Angle the cameras further than their normal range of motion
2. Support mounting in a corner (90 degree corner)
3. Slide camera mount in-and-out to support putting cameras away or moving them room to room.
4. Use existing screw holes in drywall

Mount slides in and out without a tool so cameras can be removed when not in use, or moved room to room. Make sure to put the mount at least a couple inches from the ceiling so you can slide it vertically to remove it.

The camera can also be fixed into the mount by putting screws straight through the mount into the slide fitting. I don't see a reason to do this, but it is supported.

Holes on the mount line up with holes on the camera mounts so that you can reuse the holes you already have up.

Fits the standard mount screws provided with the lighthouse cameras perfectly. If you're using your own screws, it fits a 4mm screw size with a 8mm head. Heads are recessed so standard panhead screws work great.

Pictures shown are printed on a Textured Plate, Bambu X1C, 0.4mm Hardened Nozzle using Bambu Basic PETG - White.

Tip: To remove support material in provided print profile, I recommend sliding your 3D printer's scraper tool under the support material and it pops right out.