Geisha
Print Profile(1)
Description
Project: geisha.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 155.17x230mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Black Transmission Distance: 1.5
PLA+ Esun Beige Transmission Distance: 4
PLA BambuLab Matte Scarlet Red Transmission Distance: 2.1
Swap Instructions:
Start with White
At layer #8 (0.72mm) swap to Black
At layer #10 (0.88mm) swap to Beige
At layer #15 (1.28mm) swap to Black
At layer #20 (1.68mm) swap to Jade White
At layer #21 (1.76mm) swap to Black
At layer #22 (1.84mm) swap to Scarlet Red for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)