This is a simple wall mount for the Lamborghini Huracán Technic “BRICK” set 42161 that can leverage command strips to mount to the wall in vertical or horizontal direction.

I originally printed this on the P1S in .2 and gyroid 15% infill and 3 walls for added strength, but it's probably overkill.

Two models are provided that you would either supply your own technic peg or use the one with them printed in-place. If you chose to use the printed peg version, be sure your printer is dialed in so that the pegs are less likely to shear off at the layer lines.

When supplying the “BRICK” technic pegs, they fit but can be a bit snug, so be sure your printer is calibrated sufficiently for that as well.