Mobile tray

This is a mobile tray I've always wanted to make, because moving the P1S, printers, or computer cases is too much effort. Coincidentally, I have several common universal casters at home, similar to the picture below. Generally, the stem of these casters is 11mm in diameter. The hole diameter of the tray I designed can be used directly. Of course, installation will require some force to succeed, but once installed, it's very sturdy. My model requires four of these to be printed, then connected with stainless steel or galvanized square tubes. The size is 2x2mm; measure the required length yourself. I used nearly 1m because the length of two of my models is almost 300mm. The actual required length of the square tube is not much. Feel free to discuss if you have any questions.

Print profile: generally PLA or PETG. I use a general PLA print profile.