Print Profile(1)
Description
Feel free to leave a comment or a boost if you like the print
Instructions
You can resize, but be careful not to modify the Z-axis.
Boost Me (for free)
Your boost helps me create even more models! Thank you for your support 🙏✨
Print with 100% infill and a 0.08 mm layer height, with a 0.16mm base layer.
The model measures 152.25 × 200mm.
You can print with higher layer heights below the 0.4mm base thickness.
The maximum allowed thickness is 2.32mm and the actual thickness is 2mm.
Filaments used:
- #000000 – Bambu Lab PLA Basic Black Transmission: 0.6
- #3f8e43 – Bambu Lab PLA Basic Mistletoe Green Transmission: 1
- #c70000 – WANHAO PLA Red Transmission: 3.4
- #ffffff – Bambu Lab PLA Basic Jade White Transmission: 5
This print uses 4 different filaments.
Filament change instructions:
- Start with Bambu Lab PLA Basic Black
- At layer #8 (0.72 mm), change to Bambu Lab PLA Basic Mistletoe Green
- At layer #11 (0.96 mm), change to WANHAO PLA Red
- At layer #18 (1.52 mm), change to Bambu Lab PLA Basic Jade White for the rest of the print
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)