Honeycomb Soap Dish
Copyright Claim
Honeycomb Soap Dish
Boost
8
41
8
Print Profile(1)
0.08mm layer, 3 walls, 15% infill
4.8 h
1 plate
Open in Bambu Studio
Boost
8
41
8
0
113
59
Released
Description
Honeycomb soap dish. Printed with PLA with .4 nozzle and .2 mm layer height. Printed with the MMU2S with perimeters and infill using 2 different colors/extruders. You don't need to use the MMU2S, it can be printed one solid color. Supports needed under the corners.
Comment & Rating (8)
All
Print Profile
0.08mm layer, 3 walls, 15% infill
Printed with no problems! Thank you for the model!
0
Reply
Print Profile
0.08mm layer, 3 walls, 15% infill
corners got slightly deformed with no support, still functioned well, used as a hotel shower soap dish to keep my bar from touching nasty stuff.
0
Reply
Print Profile
0.08mm layer, 3 walls, 15% infill
Needs supports on the corners.
0
Reply
Print Profile
0.08mm layer, 3 walls, 15% infill
yum
0
Reply
Print Profile
0.08mm layer, 3 walls, 15% infill
Super Druck
0
Reply
Print Profile
0.08mm layer, 3 walls, 15% infill
Support Issue:Needs supports in the four corners.
0
Reply
Print Profile
0.08mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.08mm layer, 3 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld