Geometric Lampshade designed to print in vase mode. Comes in 2 different sizes, 200mm and 225mm diameter. Use a standard E27 socket with a LED lightbulb.
Printsettings:
- print holder ("halter") solid for max strength
- print lampdhade in vase mode (aka “Spiral vase” in PrusaSlicer)
- use a external perimeter speed of 40 - 60 mm/s
- layer height: 0.2 - 0.25mm
- print upside down
- make shure you have enough solid layers on the bottom of your print so that the circle the lampshade lays on is sollid.