Geometric Lampshade designed to print in vase mode. Comes in 3 different sizes, 200mm, 230mm and 300mm. Use a standard E27 socket with a LED lightbulb.

Not shure if you like the design or want to test your printsettings? print the “Lampshade1_test.stl” first.

Printsettings:

• print holder ("halter") solid for max strength
• print lampdhade in vase mode (aka “Spiral vase” in PrusaSlicer)
• use a 0.6mm Nozzle!
• use a external perimeter speed of 40 - 60 mm/s
• layer height: 0.25 - 0.3mm
• print upside down
• make shure you have enough solid layers on the bottom of your print so that the circle the lampshade lays on is sollid.