coche mercedes tartado con hueforge.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA smartfil marron Transmission Distance: 5
PLA smatfil rojo Transmission Distance: 2.3
PLA smatfil amarillo Transmission Distance: 5.8
PLA smatfil White Transmission Distance: 6

Swap Instructions:
Start with negro
At layer #7 (0.64mm) swap to marron
At layer #12 (1.04mm) swap to rojo
At layer #20 (1.68mm) swap to amarillo
At layer #27 (2.24mm) swap to White for the rest.