[BY AUTHOR] 0.2mm layer, 15% Gyroid infill, with support, no brim
Designer
27 min
1 plate
5.0(4)
0.2mm layer, 2 walls, 15% infill
29 min
1 plate
3.0(1)
Boost
11
16
6
0
26
24
Released
Description
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone, which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13”, for whom this backpack was originally designed byAlioth.
PRINTING:
PLA/PETG/ABS will all work, I do suggest PETG or ABS for durability. No Brim, but do enable Support for the connector pin. While I recommend printing with a 0,2mm Nozzle at 0,10mm layer height for optimal looks, a 0,4mm nozzle at 0,2mm layer height will definitely work as well.
[BY AUTHOR] 0.2mm layer, 15% Gyroid infill, with support, no brim
perfect print - the backpack is large enough to hold the spare mini13 hands that print with the frame. these mini13 models and remixes are so great, if you're reading this and wonder if it's worth printing, YES IT IS. just do it. have fun! :)