Hello!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
    Start with Charcoal
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to Red
    At layer #18 (1.52mm) swap to Black
    At layer #20 (1.68mm) swap to Jade White for the rest.
 

Please feel free to share your results!