Golf simulator eagle patch "scramble"

Keep track of those rare scramble eagles in style. This 3D-printed coin doubles as a magnetic badge, so you can slap it onto a cart post, cooler, towel ring, or your bag setup and use it as a fun little “eagle counter” for the round. Raised “SCRAMBLE EAGLE” lettering with an eagle silhouette gives it a clean, bold look even in a single-color print.

What you’ll need (magnets):

• (1) Neodymium disc magnet: 0.7" diameter × 0.12" thick (DIYMAG)
  • Metric equivalent: ~17.8 mm × 3.0 mm (often listed as 18×3 mm
  • Link to magnets 
• https://www.amazon.com/DIYMAG-Adhesive-Refrigerator-Projects-0-12inch/dp/B0BDFFCSKT/ref=sr_1_1_sspa?crid=11MGSU41OYHS5&dib=eyJ2IjoiMSJ9.Swwsc0KszF6t5Pe-i63WC3dnk7A6zT0P_8v-2f38XVH3SHihvNZVlaW6tZXq8Q4ggTA4H2yyjx2QZMO8QYbM0Zo1E4_VYPYL8eZvE4-d4TDJmkOWEOB_7rghK8GU5F-jJ8dUZOqhZ3ayoERMVbGkaQ_el4eaHtfOHvLYEpoDlvg8dnxSy1W0s5fyhOj4rnMFURzBOWF960M8PFa_DolGtsNZcepLR0uQASSEej-UKlc.phkn45XyfF4oCIx-2fA48FiuNJzJJMgENZGNmy1jg6w&dib_tag=se&keywords=magnets&qid=1767111850&sprefix=magnet%2Caps%2C140&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

Print notes:

• Prints flat on the bed (coin face up)
• No supports needed
• Recommended: 0.20 mm layer height, 3–4 walls, 10–20% infill (or higher if you want it extra solid)

Magnet install options:

1. Pause-at-layer embed: Pause right before the magnet pocket closes, drop magnet in (check polarity!), then resume.
2. Glue-in: Press-fit if it’s snug; otherwise use a tiny dab of CA (super glue) or epoxy.