Print Profile(1)
Description
I designed this hanger to be modular and to meet everyone's needs and the thing I like most about this project is how the hook completely covers the screws.
these are some combinations:
- If you need a small hanger with 3 hooks you can print the single base and 3 hooks. fix the base into the wall with screws for wood or concrete (as you need), than snap in the hooks and it's done.
- if you need a medium hanger with 6 hooks you can print and combine a right and left bases together, than fix them to the wall and insert the hooks.
- for a larger hanger you need to print as many center bases you need and fit between te lefand right bases. (in one of my photo i've combined one center base with the right and left ones to make a 9 hooks hanger).
the screws used are 3.5x25mm self-tapping screw for wood but you can also use a 3.5mm screw for concrete, the important thing is that the head of the screw is flat and not rounded otherwise the hook will not fit.
this is the one i used:
but you ca find it easly online as in your local hardware store
In the future I will develop further hooks compatible with these bases.
PRINT NOTES:
To print the hooks, I recommend using a Supertack plate. If this isn't possible, I suggest adding a brim before printing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)