Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Winkle Jet Black Transmission Distance: 0.3
PLA NISU Blue Transmission Distance: 1
PLA Polyterra Grey Transmission Distance: 0.5
PLA NISU Sky Blue Transmission Distance: 0.5
PLA Sakata Orange Transmission Distance: 7.5
PLA Sakata White Transmission Distance: 2.5

Swap Instructions:
Start with Charcoal Black
At layer #4 (0.4mm) swap to Blue
At layer #12 (1.04mm) swap to Metallic Silver
At layer #13 (1.12mm) swap to Polymaker Teal
At layer #18 (1.52mm) swap to Orange
At layer #24 (2mm) swap to Cotton White for the rest.