Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA+ Elegooo Black Transmission Distance: 5
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.64mm) swap to Brown
At layer #11 (1.04mm) swap to Yellow
At layer #17 (1.52mm) swap to Jade White for the rest.