Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA+ VOXELPLA Black Transmission Distance: 5
PLA+ Sunlu Grey Transmission Distance: 2
PLA Bambu Labs Tough Silver Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #9 (0.88mm) swap to Grey
At layer #13 (1.2mm) swap to Silver
At layer #18 (1.6mm) swap to Jade White for the rest.