Search models, users, collections, and posts
2in Vending Machine Prize Capsules - THERMOFORMING
IP Report
Print Profile(2)
Standard Profile 0.2mm layer, 4 walls, 20% infill
Designer
3.4 h
5 plates
Scaled to 75%, 1.5-inch capsules
2 h
5 plates
Open in Bambu Studio
Boost
1427
3782
106
50
1.8 k
976
Released
Description
Make Capsules for any 2in capsule vending machine for a FRACTION of the cost with the magic of THERMOFORMING!!
It's easy! Just follow the steps:
- Print the two halves of the capsule “puck” with the pre-loaded settings in Bambu or Orca
- print the form and press in PETG with at LEAST 4 walls - This makes it able to withstand the direct heat!
- Place one half of the puck in the press
- Blast it with a heat gun until it BARELY starts to stretch (You want the filament to be elastic, not liquid)
- Press down HARD with even pressure and hold it there until its cool. You can speed this up with a little fan or by blowing on the model.
- Repeat for the other half
- Screw 2 halves together
- Vend!
Don't have a vending machine? Print one!
GachaPop 3D Printable Vending System
License
This user content is licensed under the MakerWorld Exclusive License.
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (106)