Please consider using your Boost token if this model/design helps you. And don't forget to smash the like button, so that others can see this model as well. Many blessings!

Remember if you want to scale, do it only with x and y axis.

z must be the same as original (or you will need to adjust color swapping layer heights).

This wall art was created in Hueforge after using AI and making personal edits.

This can be placed on a printed shelf, printed frame or place directly on the wall.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Creality Matte Black 
PLA Geeetech Matte Gray 
PLA BambuLab Matte Dark Red 
PLA BambuLab Basic Yellow

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Matte Gray
At layer #9 (0.96mm) swap to Matte Dark Red
At layer #15 (1.2mm) swap to Yellow for the rest.
 

As always.. you can play around with the colors