***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 5
PLA PolyLite White Transmission Distance: 5
PLA Kexcelled Light Brown Transmission Distance: 3.5
PLA PolyTerra Lime Green Transmission Distance: 1.5
PLA PolyLite Pro Light Yellow Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5

Swap Instructions:

Start with Black
At layer #24 (2mm) swap to Red
At layer #53 (4.32mm) swap to White
At layer #54 (4.4mm) swap to Light Brown
At layer #55 (4.48mm) swap to Lime Green
At layer #62 (5.04mm) swap to Light Yellow
At layer #63 (5.12mm) swap to White for the rest.