Here are the files for my i-DOG,

I'm a dog lover, so my inspiration came from my love for dogs, the style is very bionic is how i like to design my parts.

I made this so that anyone can easily mod this model, and add extra parts or play with imagination, you can replace any parts easily.
I did take some time to design this model so that we can print without any stupors that are 100% overhangs free ;).
 

Is a funny model  and you can play with him by placing him in many positions, work very well as bedside light and other applications just use your imagination.

Is 100% printable  except the light that I did use "IKEA - LEDBERG".
https://www.ikea.com/pt/pt/p/ledberg-projetor-led-branco-00400927/

If you prefer you can use M10 screw rod and M10 nuts in place of printed ones.

The neck has a mechanism to lock in place just to guarantee the light stays in that position, you can always clear the preset points with a sand paper and use a TPU washer, but will not work as well as the preset points.

On this link you can download the assembly manual:
 

Hope you all enjoy,

Be safe and print on my friends.

Print instructions

Printed settings:

All parts:
25% Infill / Rectilinear
0.2 layer height
3 - Perimeter
4 - Top Layers
3-  Bottom layers

Nuts:
25% Infill / Rectilinear
0.2 layer height  / 0.1 optional.
3 - Perimeter
4 - Top Layers
3-  Bottom layers

TPU washers:
For this washer I followed the tutorial from Prusa on this video, I did use the infill pattern - "stars".

The assembly is very easy. Just take note that I have made a kind of mechanism to lock the neck in place, you must align that with the neck.

On this link you can download the assembly manual:
“ClickHere to get assembly manual ”