Demon Slayer - Tanjiro hueforge - Free 3D Print Model

Search models, users, collections, and posts

bzz999

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

H2D Pro

H2S

P2S

H2C

H2D

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

3.6 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

The dimensions are 240.00mm x 140.59mm (you can scale it down if you want, but keep the Z to 2.00mm)
A follow would help a lot! <3 Thank you!

Layer height 0.08mm (extra fine)
Initial layer height 0.16.
Sparse infill density 100%, rectilinear.

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.92mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.3
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Jade White
    At layer #15 (1.28mm) swap to Red for the rest.

Comment & Rating (1)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.