AVS/JPC Mag Insert

This is a insert for the Crye Detachable M4 Flap. It allows you to run the flap without the need for the bungee retainers allowing faster reloads and reindexing of magazines. It has been tested with loaded and unloaded magazines to test retention. The strength of retention is determined by how tight you tie the internal bungee cords. You can either run it with the bungee cords that come with the flap out off the box or generic bungees. I have tested it with knock off Crye flaps but have had mixed results depending on brand. The only thing you need once printed is stickable velcro and bungee cords. 

Link to pouch: https://www.cryeprecision.com/AVS-Detachable-Flap-M4-Flat 

Also be aware that this is my first uploaded model so please excuse any mistakes I may have made.

The rough model in the picture is my test one that has seen a year of use