Humanoids doing yoga, because they need it too!
Check out the whole series on my profile.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.8
PLA BambuLab Matte Dark Green Transmission Distance: 1
PLA BambuLab Matte Grass Green Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #3 (0.72mm) swap to Dark Green
At layer #5 (1.12mm) swap to Grass Green
At layer #6 (1.32mm) swap to Jade White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.