握感完美的夹片弹弓
弓门宽90mm,适用最宽为22mm的扁皮筋
本体和夹片使用PETG打印,准星使用夜光耗材打印,与夹片粘接
弹弓本体至少4层外墙,夹片推荐使用100%填充打印
夹片需要压入热熔螺母,配合螺丝夹紧皮筋
需准备的材料有:M5*8*7热熔螺母两颗,M5*20螺丝两颗,胶水
Ergonomic slingshot
90mm fork width, maximum band width is 22mm
print with PETG, use glow-in-the-dark filament for the sight
Materials Required: two M5*8*7 heat-press insert, two M5*20 screw and some glue