Hueforge Batman
Print Profile(1)
Description
Hueforge Batman
Boost Me (for free)
Boost me please, it's free :)
Membership
Thank you for supporting me in my work
Projet: Batman3.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.81x245mm in size
You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 1.76mm
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#383838 PLA BambuLab Dark Grey Transmission Distance: 0.2
#a6a9aa PLA BambuLab Basic Silver Transmission Distance: 0.5
#cc0000 PLA BambuLab Basic Red Transmission Distance: 5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.5
This print uses 5 unique filaments
Instructions de changements:
Commencer par Charcoal
At layer #12 (1.04mm) swap to Dark Grey
At layer #13 (1.12mm) swap to Silver
At layer #14 (1.2mm) swap to Red
At layer #15 (1.28mm) swap to Yellow pour le reste.
Please leave a comment and like if you like my Hueforge. Thank you very much.
Non-commercial !!! Non-commercial !!! Non-commercial !!! Non-commercial !!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)