A simple hueforge of my favorite wrestler. A1 is down so this had to be resized to fit my A1 Mini. You can resize it, just don't change Z height. 120x120 is used here. Original size was 180x180.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Jade White for the rest.