Print Profile(2)
Description
the classic Jurassic Park sign
My settings for printing are the 0.2mm standard on Bambu slicer with a couple of tweaks:
- Fuzzyskin - Contour 0.4mm distance and 0.1mm thickness
- No Brim
- Wall Generator - Arachne
- increase the flow ratio slightly - go from 0.98 up to 1.05
Use a Textured PEI Plate and you should be all good
The back plate is a tight fit - it can hold the light up on the wall without gluing
For lighting on all of my light boxes I am using a USB powered LED light from Amazon with a bluetooth controller allowing me to control from my phone
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (258)