Conscendo Wheel by 7Point4

7Point4

Hobby & DIY>RC

Print Profile(0)

Add the first print profile to earn points

Boost

Released

Description

Landing wheel for Conscendo Evolution. Plane has a plastic skid, landing on a hard surface wears it out pretty fast, so I designed this replacement. It takes the place of the stock skid.

I am pretty sure that the same skid is used on the Conscendo Advanced also. I intend to print one and try it on the Advanced.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Supports:

Yes

Resolution:

.16 or .2

Infill:

Filament:Overture PLA and TPU White

Notes:

I included a screen grab of my support setting for the skid. It is printed at .16 layer height. The settings listed work pretty well on my Ender 3 pro, print the skid oriented so that the 4 pegs are on the build plate. Print with a Brim.

The two wheel pieces are joined with a 3mm x 6 screw. It should self tap into the other half of the wheel. The wheel can be printed at .2 mm layer height.

A 3mm x 30mm bolt is used for the axle, using a jam nut.

The TPU wheel was printed on my Creality CR-6 w/Direct Drive.

Category: R/C Vehicles