Keycap Moai

The Moai Keycap is a unique and intricate design inspired by the famous Easter Island statues. This keycap is made to add a touch of personality and culture to your keyboard. To achieve the two-tone effect seen in the picture, you will need to switch filament at the desired layer height during printing.

Photo of a make kindly provided by Kermit, 0.3mm layer height:

To achieve the best results with your print, it is recommended to use a nozzle size of 0.4mm or smaller and set the layer height to the lowest possible, at 0.1mm or lower. For the highest level of detail, resin printing is the recommended method. Additionally, due to the complex nature of the design, it is important to use supports during the printing process.

If you like it, please give it a like and share it with others. Your support is greatly appreciated and helps me continue to create / remix amazing designs.

Thank you to ET-Huang the designer of the Moai model. Also, a huge thank you to rsheldiii the designer of the keycap model. Without these talented creators, this remix would not have been possible. Shoutout to these awesome creators for their contribution to the 3D printing community!

Some models are fanart and are shared as artistic tributes, you may not sell, share, or profit from them. For original designs, a commercial license is required to sell physical prints (available on Maker World or Patreon).