Satoru Gojo
created in Hueforge workshop
please enjoy and any feed back is welcomed :)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Bambulab basic black Transmission Distance: 0.3
PLA Generic Red Transmission Distance: 4
PLA Generic BLUE Transmission Distance: 2
PLA Generic WHITE Transmission Distance: 5
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #13 (1.12mm) swap to Blue
At layer #27 (2.24mm) swap to White for the rest.