本模型适用于小米米家蓝牙温湿度计2。
我所有干燥箱都是用 西伯利亚的土豆 制作的5.8L干燥箱支架,为了不再重新打印其他带温度计的支架,所以结合支架和温度计模型制作了可以加装的温度计支架。
相对原支架,宽度略微增加了0.5毫米,使其能卡的更紧,我打了4个,只有其中一个有点过紧,但问题不大,还是可以安装的。(不知为何,这个支架本身就是有点紧)
This model is suitable for the Xiaomi Mijia Bluetooth Thermometer and Hygrometer 2.
All my dry boxes are made with 5.8L dry box brackets made of 西伯利亚的土豆 . In order to avoid reprinting other brackets with thermometers, I combined the bracket and thermometer models to create an attachable thermometer bracket.
Compared to the original bracket, the width has been slightly increased by 0.5mm to make it fit tighter. I printed four of them, only one of which was a bit too tight, but it was not a big problem and could still be installed.