Made this for my son! I think it came out great! let me know if you have feed back or any requests for hueforge!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Blue
At layer #21 (1.76mm) swap to Ice Blue
At layer #27 (2.24mm) swap to Jade White for the rest.