Bracelet with text-tag by craycray

craycray

Fashion>Jewelry

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

Tight tolerance! 0.16mm layer, 2 walls, 10% infill

Designer

2.7 h

1 plate

5.0(3)

Snap-lock - 0.12mm layer, 2 walls, 10% infill

Designer

4.6 h

1 plate

Open in Bambu Studio

Boost

Released

Description

If you want to support my work, so I can buy a proper 3D modelling software, you can buy me a ‘coffee’ here :)

https://www.buymeacoffee.com/craycray

A simple bracelet in the sizes 165/185/190 mm, one set with the bracelet only, and one set with a tag where you can add text, like a name for instance. The hook mechanism is a tight fit, after a few open/close it's a perfect fit.

Update 2023-03-08:

Adjusted the naming of first version, it's a tight fit, you might have to adjust(+- 0.04) the hook if not calibrated properly.

Otherwise, there's a snap-lock mechanism in a new print profile.

Comment & Rating (6)

@Maxxcreeper

Print Profile

Tight tolerance! 0.16mm layer, 2 walls, 10% infill

(Edited)

The designer has replied

@craycray

Hi! Thanks for trying it out, don't have that issue but I can understand, very tight tolerance. I'm running some tests with different lock mechanisms, will update when done!

@Maxxcreeper

Replying to @craycray :

i was able to take off .05 from the end and it was great i tried .04 from the end was tighter but still managable.

@craycray

Replying to @Maxxcreeper :

I added a snap-lock mechanism as well, would be great if you could try it out :)