Printed great! Thanks for sharing the model 🎉

mjoshd

grizzie17

cover

2024-02-29_8has8vcz8s0x.png

PXL_20240526_114338692_3104b8ee-a9ca-4cbe-835c-2ace69c9b027.webp

plate_1.webp

plate_1.png

Adding this profile since there wasn't one available when I printed the .stl file.Not using vase mode since it showed a hole at the top after slicing. Print takes about 2 hours.<ul><li>no supports needed</li><li>0.2mm layer height</li><li>1 wall</li><li>1 top layer</li><li>2 bottom layers</li><li>0% infill</li></ul>

0.2mm layer, 1 walls, 0% infill

This is a vase-mode (single-wall) print for a ceiling air vent. Just take some magnets and stick it to the vent.I have even printed this using LW-PLA to make it super light.<h4>Slicer Settings</h4>Wall Line Count: 1 Top Layers: 1 Bottom Layers: 2 Infill Density: 0.0Surface Mode: Both Spiralize Outer Contour: Yes Smooth Spiralized Contours: Yes&nbsp;&nbsp;

Print Profile(1)

Description

Slicer Settings

Comment & Rating (1)

License

Related Models

Air Vent Director

HEX LAMP - LED KIT 001 - FOXWOOD

Anti-sphere 2 Plant pot and Planter - Vase mode

P1S LED Air Vent Glass Riser V2

Air-Vent Deflector (Vase Mode)