jdlap13

cover

pic1_cbde197b-a3f1-41fc-82f9-89f5815c4f41.jpg

plate_1.png

火星猴

qq_pic_merged_1718450636744_4fb68c1d-0746-466f-88f0-e2c21974550a.webp

plate_1.webp

增加了底部孔洞直径，死星模型表面增添一个镂空0.2mm喷头，0.08mm层高。外墙线宽需设置为0.15mm，否则无法完整切片模型。模型上半部分可无支撑打印，键帽部分支撑选择普通即可

The diameter of the bottom hole has been increased, and a hollow has been added to the surface of the Death Star model.0.2mm nozzle, 0.08mm layer height. The outer wall width should be set to 0.15mm, otherwise the model cannot be sliced completely. The upper part of the model can be printed without support, and the keycap part can choose normal support.

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

Deathstar Keycap for cherry MX keycap stems

Print Profile(1)

Description

Comment & Rating (21)

License

Related Models