Thread Reaming Tool
Print Profile(0)
Description
These tool is designed for "cleaning up" M3 to M6 holes. When 3d printing these, the threads are often too tight, or the bolt does not fit. You could also use this on a regular, threadless, printed hole, but I would not recommend at as the cutting tip gets clogged quickly.
The only hardware required is a hex head bolt and a bolt of a matching size. To make this function as intended, use a dremel or similar to cut away a notch from the bolt. This creates a cutting tool
If your bolt head is slightly too big for the handle, scale it up by a few percent until it fits your hardware. Scaling may be needed especailly if your hardware is cheap.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)